Works great with stretchy fabrics such as
spandex, lycra, cotton, polyester and blends. Soft ‘n
Stretchy Transfer Sheets for Dark Fabrics are an opaque white
material to be used on dark or bright color fabrics.
Use a smooth, hard, heat resistant surface, such as a wood
cutting board for ironing. Do
NOT use ironing board, glass or heat sensitive surfaces.
Download
Instructions
|
|
Questions |
|
|
|
|
What are
Soft 'n Stretchy (Dark) Transfer Sheets? |
|
|
|
How do
I print on the Soft 'n Stretchy Transfer (Dark) Sheets? |
|
|
|
Can
Soft 'n Stretchy (Dark) Transfer Sheets be used in a laser
printer? |
|
|
|
How do I iron
the Soft 'n Stretchy (Dark) Transfer Sheets? |
|
|
|
How do I
wash my Soft 'n Stretchy (Dark) Transfer Sheets after my
images are printed? |
|
|
|
|
|
|
|
Answers |
|
|
|
|
What
are Soft 'n Stretchy (Dark) Transfer Sheets? |
|
|
|
Soft ‘n
Stretchy Transfer Sheets for Dark Fabrics are an opaque white
material to be used on dark or bright color fabrics. Works
great with stretchy fabrics such as spandex, lycra, cotton, polyester and blends.
Back To Questions |
|
|
|
How
do I print on the Soft 'n Stretchy (Dark) Transfer Sheets? |
|
|
|
Design your image
on the computer using photos, graphics and/or text. DO
NOT “mirror image”. Use the standard printing
orientation. You may wish to test your final image by printing
to a plain piece of paper first. Insert a single transfer sheet
into your printer so that printing appears on the unmarked,
duller, rougher side of the sheet. Printer should be set at
best quality, plain paper. Print image. Allow image to dry
30 minutes before transferring. Cut out image if desired. Note
that the white of the transfer sheet will remain white after
transferring.
Back To Questions
|
|
|
|
Can
Soft 'n Stretchy (Dark) Transfer Sheets be used in a laser
printer? |
|
|
|
No, soft 'n Stretchy
(Dark) Transfer Sheets were designed for use in color inkjet
printers only.
This product is intended for use in standard inkjet printers
only. Do not use in other printers or copiers such as laser
printers or any other printer/copier that applies heat, as
it may damage the machine. Test the product you plan to use
to determine the suitability of the product for your equipment,
methods and substrate material.
Back To Questions |
|
|
|
How
do I iron the Soft 'n Stretchy (Dark) Transfer Sheets? |
|
|
|
Preheat iron
to highest (cotton) setting. DO
NOT USE STEAM. (Empty any water that may be in iron.
Allow iron to preheat for five minutes). Place a pillowcase
on smooth, hard, heat resistant ironing surface such as a
wood cutting board. Do not use ironing board. Iron pillowcase,
if necessary, to remove wrinkles. Pre-iron garment or project
to remove any moisture and wrinkles. Starting from an edge
or corner of the transfer sheet, remove the backing paper
and discard. Position transfer image side UP on project surface.
Cover the entire image area with parchment paper (included
in the package). If parchment is damaged or misplaced, baking
parchment (available at grocery stores) may be substituted.
Using firm pressure, slowly iron over the entire surface
with sufficient overlapping (1) side-to-side (2) bottom to
top and (3) along the edge moving continuously for 2-3 minutes.
Remove parchment paper immediately or when it cools. Depending
upon the material used, a gentle pulling / stretching motion
applied to the fabric after removal of the backing sheet
may aid in the process of the transfer setting into the fibers.
Back To Questions
|
|
|
|
How
do I wash my Soft 'n Stretchy (Dark) Transfer Sheets after
my images are printed? |
|
|
|
Wash and dry according
to your fabric’s normal washing instructions. After washing,
transfer may be directly ironed on.
Back To Questions |